Queen platform bed – Build a platform bed consists of little more than make a model box with straps in the center and place a solid piece on top. The queen size mattresses measure about 60 inches wide by 80 inches long. The platform should be able to sustain those dimensions with about 2 inches along the sides and at the foot of the bed to take into account differences in sizes of manufacturers.
Queen platform bed, place a plank in the floor 60 inches. Measure 1 inch from the edge and put a pencil mark, repeat the mark at the other end of the plank. Do the same with the other two 60-inch boards. Draw straight marks the ends of the boards, with a level or a carpenter’s line.
Queen platform bed, selects a drill having the same diameter or a slightly lower body of the screws. Place the bit in the drill. Drilled three pilot holes evenly spaced across the line drawn along the boards 60 inches. Vertically placed one of the 60-inch boards and one of the boards 78 inches long shores. Place them forming an L or a 90 ° angle, one end of the cut long side against short bulletin board, by the pilot holes.